-
AMT-FLUXA™-RO-BW-4040
The AMT-FLUXA™-RO-BW series is engineered for
brackish water treatment where both high salt rejection and organic
fouling resistance are required. It is suitable for typical brackish
water salinity ranges (≈ 1,000-12,000 mg/L TDS) and
industrial reuse streams with moderate organics. BW elements
are optimized for higher salinity feeds and stable performance under
elevated operating pressures, while maintaining enhanced fouling
resistance for longer cleaning intervals and lower lifecycle cost.
An economical membrane range offering reliable
performance and consistent quality, featuring BW (Brackish
Water) membranes for cost-efficient water treatment.
Product Dimensions
|
Model Name
|
Module Specifications
|
Performance Specifications
|
Data Sheet
|
|
Active Membrane Area
|
Feed Spacer
Thickness
|
Stabilized
Rejection
|
Minimum
Rejection
|
Stabilized Flow
|
Minimum Flow
|
|
(ft²)
|
(m²)
|
(mils)
|
(%)
|
(%)
|
(GPD)
|
(m³/d)
|
(GPD)
|
(m³/d)
|
AMT-FLUXA™-
RO-BW-4040
|
80
|
7.3
|
34
|
99.6%
|
99.3%
|
2,200
|
8.3
|
1870
|
7.08
|
Get Pdf
|
Test Conditions:
2000 ppm NaCl, 25°C (77°F), 225 psi, 15% recovery, pH 7-8.
This data is generated after 24h stable testing, permeate flow tolerance ±15%.
Effective Area tolerance ±3%. AMT reserves the right to change product
performance parameters without prior notice.
-
AMT-FLUXA™-RO-ULP-8040
AMT-FLUXA™-RO-ULP series by Adimem Technologies offers
Ultra Low-Pressure RO membrane elements. The ULP Series is
best suited for feed water with TDS up to 4000 ppm. It not
only ensures a larger water output and higher desalination rate, but
also significantly reduces the system operating pressure. Compared
to the standard BW Series, the operating pressure of the ULP Series
is one-third lower, resulting in approximately a one third
reduction in energy consumption. Moreover, the fouling
resistance capability of ULP membranes allow them to even
effectively treat low-quality water with a high propensity for
biological or organic pollution. An economical membrane
range offering reliable performance and consistent quality,
featuring ULP for cost-efficient water treatment.
Product Dimensions
|
Model Name
|
Module Specifications
|
Performance Specifications
|
Data Sheet
|
|
Active Membrane Area
|
Feed Spacer
Thickness
|
Stabilized
Rejection
|
Minimum
Rejection
|
Stabilized Flow
|
Minimum Flow
|
|
(ft²)
|
(m²)
|
(mils)
|
(%)
|
(%)
|
(GPD)
|
(m³/d)
|
(GPD)
|
(m³/d)
|
AMT-FLUXA™-
RO-LEFR-8040
|
400
|
37
|
34
|
99.5%
|
99.3%
|
12500
|
47.4
|
10,625
|
40.2
|
Get Pdf
|
Test Conditions: 1500 ppm NaCl, 25°C (77°F), 150 psi, 15% recovery, pH
7-8. This data is generated after 24h stable testing, permeate flow tolerance
±15%. Effective Area tolerance ±3%. AMT reserves the right to
change product performance parameters without prior notice.
-
AMT-FLUXA-RO-BW-8040
The AMT-FLUXA™-RO-BW series is engineered for brackish
water treatment where both high salt rejection and organic
fouling resistance are required. It is suitable for typical
brackish water salinity ranges (≈ 1,000-12,000 mg/L TDS)
and industrial reuse streams with moderate organics. BW
elements are optimized for higher salinity feeds and stable
performance under elevated operating pressures, while
maintaining enhanced fouling resistance for longer cleaning
intervals and lower lifecycle cost. An economical
membrane range offering reliable performance and consistent
quality, featuring BW (Brackish Water) membranes for
cost-efficient water treatment
Product Dimensions
|
Model Name
|
Module Specifications
|
Performance Specifications
|
Data Sheet
|
|
Active Membrane Area
|
Feed Spacer
Thickness
|
Stabilized
Rejection
|
Minimum
Rejection
|
Stabilized Flow
|
Minimum Flow
|
|
(ft²)
|
(m²)
|
(mils)
|
(%)
|
(%)
|
(GPD)
|
(m³/d)
|
(GPD)
|
(m³/d)
|
AMT-FLUXA™-
RO-BW-8040
|
400
|
37
|
34
|
99.6%
|
99.5%
|
11000
|
41.6
|
9,350
|
35.5
|
Get Pdf
|
Test Conditions: 1500 ppm NaCl, 25°C (77°F), 225 psi, 15% recovery, pH 7-8.
This data is
generated after 24h stable testing, permeate flow tolerance ±15%. Effective
Area tolerance
±3%. AMT reserves the right to change product performance parameters without
prior notice.
-
AMT-FLUXA™-RO-ULP-4040
AMT-FLUXA™-RO-ULP series by Adimem Technologies offers
Ultra Low-Pressure
RO membrane elements. The ULP Series is best suited for feed
water with TDS
up to 4000 ppm. It not only ensures a larger water output and
higher
desalination rate, but also significantly reduces the system
operating pressure.
Compared to the standard BW Series, the operating pressure of the
ULP Series is
one-third lower, resulting in approximately a one third reduction
in energy
consumption. Moreover, the fouling resistance capability of
ULP membranes
allow them to even effectively treat low-quality water with a high
propensity for
biological or organic pollution.
An economical membrane
range offering
reliable performance and consistent quality, featuring ULP for
cost-efficient
water treatment.
Product Dimensions
|
Model Name
|
Module Specifications
|
Performance Specifications
|
Data Sheet
|
|
Active Membrane Area
|
Feed Spacer
Thickness
|
Stabilized
Rejection
|
Minimum
Rejection
|
Stabilized Flow
|
Minimum Flow
|
|
(ft²)
|
(m²)
|
(mils)
|
(%)
|
(%)
|
(GPD)
|
(m³/d)
|
(GPD)
|
(m³/d)
|
AMT-FLUXA™-
RO-ULP-4040
|
80
|
7.3
|
34
|
99.5%
|
99.0%
|
2400
|
9.1
|
2040
|
7.7
|
Get Pdf
|
Test Conditions: 1500 ppm NaCl, 25°C (77°F), 150 psi, 15% recovery, pH 7-8.
This data is
generated after 24h stable testing, permeate flow tolerance ±15%. Effective
Area tolerance
±3%. AMT reserves the right to change product performance parameters without
prior notice.
Need help selecting the right RO
membrane?
Our technical team can assist you with membrane selection, system
design,
and pilot support to maximize recovery and reduce operating costs.
We also
offer heat sanitisable RO membranes for specialised food and pharma
applications. Contact us to know more.
