Microfiltration (MF) membranes have pore sizes in the range of 0.1 to 1.0 microns. These membranes can filter out large suspended solids such as particulates, colloids, fat and bacteria while, it allows relatively smaller particles like, proteins, polysaccharides to pass through it.
Operating at low pressures, Adimem’s FLUXA™ MF membranes are ideal for water purification, food & beverage processing, pharmaceuticals, and wastewater treatment—offering high flux, low energy consumption, and consistent removal of fine particulates.
Adimem’s FLUXA™ MF series offers high-performance PVDF & PES spiral wound microfiltration membranes. These come in sanitary or FRP outerwrap, in both 8” and 4” sizes, ideal for high-purity clarification and hygienic processes. We also offer UPVC and SS housings for these FLUXA™ MF elements.
| Model | Material | Pore Size | Size | Applications | Wrap Type | Data Sheet |
|---|---|---|---|---|---|---|
| AMT-FLUXA™-MF-PES-010 | PES | 0.1 µm | 8040 / 4040 | Biotech Clarification, Beverage filtration |
Sanitary (SN) / FRP (FP) |
|
| AMT-FLUXA™-MF-PVDF-010 | PVDF | 0.1 µm | 8040 / 4040 | Dairy (fat/protein separation), RO pretreatment |
Sanitary (SN) / FRP (FP) |
|
| AMT-FLUXA™-MF-PVDF-020 | PVDF | 0.2 µm | 8040 / 4040 | Beverage clarification, food & pharma |
Sanitary (SN) / FRP (FP) |
|
| AMT-FLUXA™-MF-PVDF-045 | PVDF | 0.45 µm | 8040 / 4040 | High-solids removal, CIP reuse |
Sanitary (SN) / FRP (FP) |
|
Note: Customisable feed spacer thickness
Precision microfiltration membranes for biotech, analytical, and diagnostic workflows, available in hydrophilic and hydrophobic PVDF & PES.
| Format | Material | Pore Sizes | Applications | Data Sheet |
|---|---|---|---|---|
| 8 x 10
cm sheets, 20 x 300 cm rolls |
PVDF (Hydrophilic/ Hydrophobic) | 0.1 μm, 0.2 μm, 0.45 μm | Sample prep, Western blotting, Cell culture diagnostics |
|
For FLUXA™ MF, which is used predominantly for a low pressure application, we offer AdiShell™ UPVC housing. These are a cost effective alternative to traditional FRP or stainless steel housings that are predominantly used for high pressure RO/NF applications. AdiShell™ allows users to upgrade or change membrane elements without replacing the housing- reducing both CAPEx and downtime.
